Step 1: Remove plunger and add any quantity of pellets up to the line marked 'Max. Pellets' Step 2: Replace plunger and push down until the pellets are lightly compressed, ensure locking collar is securely in place. Step 3: Flip open the seal cap and by retracting the plunger, draw water up to the line marked "Max. Water'
Step by Step User Guide:
Step 1: Remove plunger and add any quantity of pellets up to the line marked 'Max. Pellets'
Step 2: Replace plunger and push down until the pellets are lightly compressed, ensure locking collar is securely in place.
Step 3: Flip open the seal cap and by retracting the plunger, draw water up to the line marked "Max. Water'
Step 4: There will be a small amount of air between the plunger and the water line, push this excess air out of the pump.
Step 5: Close the seal cap with your thumb and pull the plunger up to the top, repeating 3-5 times to ensure that all pellets have sunk
Step 6: Open the seal cap to allow air back in to the pump
Step 7: Unlock the locking collar, remove the plunger fully and empty contents into a bait box where the now sinking pellets can soften fully in water
The Super Pump is perfect for 2mm, 4mm and 6mm expander pellets
